Equipment
Polish Line I (Brush Finish)
Our standard brush finish produced by No.
150 ~ No.320 mesh abrasives. Our products
are particularly forfood processing equipment, elevator sector and wall cladding industry.
 
Polish Line II (Mirror Finish)
By polishing with successively finer abrasives and buffing extensively with all grit lines are removed. It is suitable for building entrance and decoration.
 
Leveler & Shearing Line
- Stainless steel Width: up to 1524mm
- Stainless steel Thickness: up to 3.0mm
- Maximum Coil Weight: up to 20 metric tons
LEVELLER LINE GRADE |
THICKNESS (mm) |
MAX. WIDTH (mm) |
MAX. WEIGHT (ton) |
MAX. CUT LENGTH (mm) |
0.3~3.0 |
1600 |
20 |
6000 |
Slitting Line
- Stainless steel Width: up to 1524mm
- Stainless steel Thickness: up to 3.0mm
- Minimum Coil Width: 10mm (depend on thickness)
SLITTING LINE GRADE |
THICKNESS (mm) |
MAX. WIDTH (mm) |
MAX. WEIGHT (ton) |
MAX. S
LITTED WIDTH (mm) |
0.3~3.0 |
1600 |
20 |
25 |
| 